Basic Info.
Product Description
Long life span industrial exhaust gas electric generator set
CORE FEATURES
· Low cost in maintenance.
· Large cylinder, Long Stroke, Low Speed, which means big reserve power capacity
and constant power output.
· Low Engine Speed at 500 or 600RPM.
· Naturally Aspirated, which means low failure rate and minimal downtime.
· Internal Mixing System (for high hydrogengas)
· Strong Treatment and Resistance ability against TAR.
· Long Overhaul Time of 60000 hours and lifecycle of 20-25 years.
· CE and ISO approved.
· Product range: Syngas generator, biogas generator, natural gas generator, biomass generator, wood gas generator,coal gas generator, coal bed gas generator, syngas generator,diesel generator etc.
| Technical Parameters | |||
| Model Number | LH400GFJ | LH500GFJ | LH600GFJ |
| Brand Name | LVHUAN | ||
| Engine Type | 6300D/J-1 | 8300D/J-2 | 8300D/J-3 |
| Rated Power | 400KW | 500KW | 600KW |
| Rated Speed | 600 | ||
| Rated Frequency | 50/60Hz | ||
| Rated Voltage | 400/230V | ||
| Phase | 3 phase, 4 wire | ||
| Voltage Stability | ±2.5 | ||
| Voltage Transient | ±15 | ||
| Voltage Stable time | ≤1.5S | ||
| Heat consumption | ≤12MJ/kw.h | ||
| Lubricant consumption | ≤1.0g/kw.h | ||
| Engine Capacity | 161 | 215 | 215 |
| Cylinder Number | 6 | 8 | 8 |
| Cylinder Bore | 300mm | ||
| Stroke | 380mm | ||
| Starting System | Compressed air/motor start | ||
| Cooling Method | water cooled | ||
| Lubricant Method | Passive and flying lubricant | ||
| Isolation Class | H | ||
| Protection | IP23 | ||
| Alternator | jiali/ganfaneng | ||
| Power Factor | 0.8 lagging | ||
| Exciting Method | phase compound excitation/self-excitation | ||
| Colour | your choice | ||
| Certificates | ISO 9001:2008 | ||
| Warranty | 1 year or 1500 running hours | ||
| Type | Open | ||
| Control system | Automatic alarm system | ||
WORKING CONDITION
Worksite Requirement
The worksite needs to meet following basic requirements:
a) Ambient temperature between -20ºC~+40ºC;
b) Relative humidity less than 90%(20ºC);
c) Site elevation not higher than 2000m;
d) For outdoor installation, simple rain shelter is required.
Gas Requirements
Within 1m to the intake valve of gas generator set:
1) Gas temperature≤40ºC;
2) Gas Pressure: 2.5~10kPa, Pressure changing rate≤ 1kPa/min;
3) H2S≤200mg/Nm3;
5) Tar Content≤20mg/Nm3;
6) Moisture Content ≤20g/Nm3;
7) Impurity particle size≤5μm; impurity content≤30mg/Nm3;
8) Heat value≥4MJ/Nm3;
PRODUCT SHOW